老金沙9170| 首页

      <pre id="gb93h"></pre>



        IBS Country FlagsIBS Electronics USAIBS Electronics MexicoIBS Electronics PhilippinesIBS Electronics ChinaIBS Electronics MalaysiaIBS Electronics IndiaIBS Electronics Hong KongIBS Electronics Singapore

        Printed Circuit Board Manufacturing:

        IBS Electonics Printed Circuit Board Manufacturing.

        IBS Electronics preserves its position in the market of high mix low/medium volume with fast delivery to produce high quality level of printed circuit board up to 20 layers. The notion of “Speed” is echoed throughout the whole company management activities. “Service beyond Expectation” is our persistent customer service philosophy. IBS Electronics circuits gets the U.S. UL Safety Certificate (UL File No: E301546) including normal FR4 material, aluminum base and high-frequency rogers material and has the perfect ISO9001 Quality Management System approved by SGS. In addition our products meet the RoHS standard certified by the SGS.

        From a complex multi-layer board to a double sided surface mount design, our goal is to provide you a quality product that meets your requirements and is the most cost effective to manufacture.

        IBS ELECTRONICS Circuits Technical Specification

        Technical Specification
        SeqItemStandardAdvancedRemarks
        1Number of Layer1-10 Layers12-16 Layers
        2Base MaterialFR4(High TG), Teflon, Rogers, Aluminum Based
        3Finish Board Thickness0.30 mm ~ 3.20 mm
        (8 mil ~ 126 mil)
        0.20 mm ~ 4.5 mm
        (5 mil ~ 177 mil)
        4Minimum Core Thickness0.15mm (6 mil)0.10mm (4 mil)
        5Copper ThicknessMin. 1/2 OZ, Max. 4 OZMin. 1/3 OZ, Max. 6 OZSelective Area
        Available,
        Thicker Cu On
        Request
        6Min.Trace
        Wide&Line?Space
        Single Sided0.13 mm (5 mil)0.10mm (4 mil)
        Double Sided0.13 mm (5 mil)0.10mm (4 mil)
        7Min. Hole
        Diameter
        Drilling /PTHf0.20 mm (8 mi )f0.20 mm (8 mil)
        Punchingf1.0 mm (40 mil)f0.90 mm (36 mil)If Necessary
        8Dimension
        Tolerance
        Hole Position0.08 (3 mil)
        Conductor Width(W)20% Deviation of Master
        A/W
        1mil Deviation of Master
        A/W
        Hole Diameter(H)NPTH:+/-0.05 mm (2 mil)NPTH:+/-0.05 mm (2 mil)
        PTH: +/-0.075 mm (3 mil)PTH: +/-0.05 mm (2 mil)
        Outline Dimension0.13 mm (5 mil)0.10 mm (4 mil)
        Conductors & Outline
        ( C – O )
        0.15 mm (6 mil)0.13 mm (5 mil)
        Warp and Twist0.75%0.50%
        9Surface Treatment On Land AreaLeadfree HASL, Entek, Immersion Silver, Immersion
        Tin, Golden Finger, OSP
        10V-CuttingPanel Size457.2mm X 622 mm (max.)457.2mm X 800 mm (max.)
        Board Thickness0.50 mm (20mil) min.0.30 mm (12mil) min.
        Remain Thickness1/3 board thickness0.40 +/-0.10mm
        (16+/-4 mil)
        Tolerance±0.13 mm (5mil)±0.1 mm (4 mil)
        Groove Width0.50 mm (20mil) max.0.38 mm (15 mil) max.
        Groove to Groove20 mm (787mil) min.10 mm (394 mil) min.
        Groove to Trace0.45 mm (18mil) min.0.38 mm (15 mil) min.
        11SlotSlot size tol.L=2WPTH Slot: L:+/-0.13 (5 mil) W:+/-0.08 (3 mil)PTH Slot: L:+/-0.10 (4 mil) W:+/-0.05 (2 mil)(1) L=Length of slot
        (2) W=Width of slot
        (3) Min.drill bit size
        for multi-hit is
        0.60mm
        NPTH slot(mm) L+/-0.10
        (4 mil) W:+/-0.0 5 (2 mil)
        NPTH slot(mm) L:+/-0.08
        (3 mil) W:+/-0.05 (2 mil)
        12Min Spacing
        from hole
        edge to
        hole edge
        0.30-1.60
        (Hole Diameter)
        0.15mm (6mil)0.10mm (4mil)
        1.61-6.50
        (Hole Diameter)
        0.15mm (6mil)0.13mm (5mil)
        13Minimum spacing between hole edge
        to circuitry pattern
        PTH hole: 0.20mm (8mil)PTH hole: 0.13mm (5mil)
        NPTH hole: 0.18mm (7mil)NPTH hole: 0.10mm (4mil)
        14Image transfer
        Registration tol
        Circuit pattern vs.
        index hole
        0.10 (4mil)0.08 (3mil)
        Circuit patten vs.2nd
        drill hole
        0.15 (6mil)0.10 (4mil)
        15Registration tolerance of front/back image0.075mm (3mil)0.05mm (2mil)
        16MultilayersLayer-layer misregistration4 layers:0.15mm (6mil) max.4 layers:0.10mm (4mil) max.
        6 layers:0.20mm (8mil) max.6 layers:0.13mm (5mil) max.
        8 layers:0.25mm (10mil) max.8 layers:0.15mm (6mil) max.
        Min.Spacing From
        Hole Edge
        to Innerlayer Pattern
        0.225mm (9mil)0.15mm (6mil)
        Min.Spacing From Outline to
        Innerlayer Pattern
        0.38mm (15mil)0.225mm (9mil)
        Min. board thickness4layers:0.30mm (12mil)4layers:0.20mm (8mil)
        6layers:0.60mm (24mil)6layers:0.50mm (20mil)
        8layers:1.0mm (40mil)8layers:0.75mm (30mil)
        Board thickness tolerance4layers:+/-0.13mm (5mil)4layers:+/-0.10mm (4mil)
        6layers:+/-0.15mm (6mil)6layers:+/-0.13mm (5mil)
        8-12 layers:+/-0.20mm (8mil)8-12 layers:+/-0.15mm (6mil)
        17Insulation Resistance10KO~20MO(typical:5MO)
        18Conductivity<50O(typical:25O)
        19Test voltage250V
        20Impedance controlTypical: 50O+/-10%
        老金沙9170